New feature
Water used for irrigation: daily and monthly totals
A metered valve reports litres. GrowerHub groups completed irrigation reports by day and month and shows where coverage is incomplete.
Read the full story →GrowerHub news
New app features, useful guides and fixes. See what changed and how to try it.
New feature
Scheduled watering: days, time and duration
The new schedule does not require a soil sensor. Observe its plan first, then explicitly enable irrigation control when ready.
Read the full story →
New feature
Sensor-based watering: anchors for your own soil
Use readings after normal watering and before the next one instead of a universal percentage. GrowerHub checks trends and response to water.
Read the full story →
New feature
The next watering: a plan with clear reasons
The drying forecast uses local anchors, moisture history and the last watering. It gives a provisional time or explains which data is missing.
Read the full story →
New feature
Demo valve: watering and a meter without equipment
Add a virtual valve to the shared demo farm, assign it to a greenhouse and explore watering, pulses and simulated litres in the same app screens.
Read the full story →Fixes and small updates
- FixThe watering plan refreshes after settings are saved. The previous plan is no longer shown as current while the new one loads.
- FixWatering device cards direct you to a bounded session through the greenhouse. The off button remains available.
- FixA new page opens at the top when you follow a menu or article link. Back navigation and section links retain their usual behaviour.
- Guide updateThe watering log guide now explains measured, estimated and unknown water volumes. Open the guide →
Start with your first device
Explore the demo farm or connect a device through PushOk or Zigbee2MQTT. Free to use, with no bank card required.